CALFLOTM AF Heat Transfer Fluid Introduction
Features and Benefits
Petro-Canada CALFLOTM AF is a highly efficient heat transfer fluid formulated to lower operating costs in systems where fluid resistance to oxidative breakdown is critical.
• Better oxidative resistance than leading competitors can extend fluid life and lower operating costs. • Higher resistance to oxidative breakdown versus leading competitive fluids.
CALFLO AF’s unique chemistry starts with a blend of 99.9% pure base fluids, produced using a patented HT purity process. These crystal clear fluids are free of impurities that can hinder performance. Utilizing more than 25 years of formulating experience, PetroCanada fortifies these thermally stable fluids with specially selected additives to provide stronger resistance to oxidative breakdown than leading competitive fluids.
Applications Petro-Canada CALFLO AF is recommended for use in non pressurized, liquid phase, closed heat transfer systems operating at bulk temperatures up to 316°C (600°F). CALFLO AF’s outstanding resistance to oxidative breakdown can result in longer fluid life and lower operating costs in systems where exposure to air cannot be avoided, and oxidation is the most likely form of fluid degradation. Typical applications include temperature control units used in plastic extrusion, plastic moulding, and metal diecasting operations.
– significantly reduce a fluid’s thermal efficiency
– make the fluid more difficult to circulate through the heat transfer system
– result in overheating of the fluid
– necessitate a costly, premature fluid change-out
CALFLO AF demonstrates significantly better resistance to viscosity increase versus a leading specialty fluid in a severe oxidation test conducted at an independent industry laboratory: Fluid Thickening with Oxidation IP 48/97 (modified) Oxidation Test 200°C (392°F)
1400
Viscosity Increase (%)
The result is CALFLO AF, a heat transfer fluid that provides high thermal efficiency in systems operating up to 316°C (600°F). CALFLO AF’s breakthrough chemistry can extend fluid life longer than leading competitive fluids, lowering operating costs by reducing the frequency of fluid change-outs.
As a fluid oxidizes, it becomes more viscous. This increase in viscosity can:
1200 1000
Significant thickening
800 600 400 200 0
CALFLOTM AF
Leading Major Oil Company’s Fluid
Leading Specialty Supplier’s Fluid
Testing conducted at an independent laboratory
• Less prone to carbon residue and sludge formation versus leading competitive fluids. CALFLO AF’s resistance to oxidative breakdown also minimizes the formation of carbonaceous deposits and sludge within heat transfer systems. These deposits can dramatically reduce heat transfer efficiency and increase operating costs.
CALFLO AF demonstrates significantly better resistance to carbon residue formation versus a leading major oil company’s fluid and a leading specialty supplier’s fluid in a severe oxidation test conducted at an independent industry laboratory: Carbon Residue Formation
IP 48/97 (modified) Oxidation Test 200°C (392°F) Increase in Carbon Residue with Oxidation (%wt)
2.5
Significant carbon residue
1.0 0.5 0
CALFLOTM AF
Leading Major Oil Company’s Fluid
Leading Specialty Supplier’s Fluid
Testing conducted at an independent laboratory
Even at mild 135°C (275°F) temperature conditions, a second laboratory study conducted by PetroCanada Research and Development demonstrates CALFLO AF’s stronger resistance to sludge formation versus a leading major oil company’s fluid: Sludge Formation † Cincinnati Milacron Test
†Aluminum test fixture was not used
80
Sludge Formation (mg/100ml)
70 60 50 40
• CALFLO AF does not require special handling. Shipments and storage of CALFO AF do not normally require special safety permits. Empty drums used to transport CALFLO AF are readily accepted by drum re-conditioners. In addition, used CALFLO AF may be responsibly disposed in the following ways **: • through re-sale to used oil recycling companies • in some jurisdictions, combined with BTU recovery systems
Operational Considerations CALFLO AF’s high thermal stability provides long service life under normal operating conditions up to its maximum recommended temperature. However, actual fluid life is dependent upon system design and operating practice.
Significant sludge
30 20 10 0
CALFLOTM AF
• Unlike some alternative fluid chemistries, CALFLO AF is virtually odourless and is not considered a toxic* substance according to OSHA (United States), WHMIS (Canada) and EUDPD (Europe) criteria. • Because CALFLO AF produces no objectionable odours and is not a respiratory or skin irritant, workplace conditions remain pleasant and safe for continuous operations.
2.0 1.5
• No compromise to environmental and workplace health and safety.
Leading Major Oil Company’s Fluid
Leading Specialty Supplier’s Fluid
Testing conducted by Petro-Canada Research & Development
• Low vapour pressure can save on top-up costs while improving workplace safety. • CALFLO AF’s low vapour pressure can reduce or eliminate fluid leakage from control valves and pipe flanges. • Reduction or elimination of leaks provides a cleaner and safer operating environment, and results in operational savings by reducing the need for cleaning, maintenance and fluid top-up. • Natural lubricity extends operational savings. • CALFLO AF’s natural lubricating properties can also reduce maintenance costs by extending the service life of circulating pumps and other rotating parts.
Special precautions should be taken to avoid operating conditions that can shorten fluid life. These include: • thermal shocking resulting from accelerated system temperature increases • thermal shocking from hot spots on a system’s heating coils • continuously running above the maximum recommended operating temperature Although CALFLO AF is highly resistant to oxidative breakdown, excessive air and water contamination can reduce thermal efficiency and shorten fluid life. Where practical, Petro-Canada recommends inert gas blanketing of a system’s expansion tank to guard against exposure to air and water and the need to change-out the fluid prematurely. While CALFLO AF has been formulated to resist breakdown when exposed to air and water, contamination with process chemicals or deteriorated residual fluids can shorten fluid life. To maximize system efficiency and fluid life, Petro-Canada highly recommends system cleaning and flushing to remove all contaminants, sludge and varnish prior to recharging a system with CALFLO AF.
Thermal Data PROPERTY Density, kg/L (lb/ft3) Thermal Conductivity, W/m K (BTU/hr.°F.ft) Heat Capacity, kJ/kg K (BTU/lb. °F) Vapour Pressure, kPa (psia)
TEMPERATURE 15°C (59°F) 38°C (100°F) 260°C (500°F) 316°C (600°F) 0.867 (54.1)
0.852 (53.2)
0.715 (44.7)
0.681 (42.5)
0.142 (0.082)
0.141 (0.082)
0.130 (0.075)
0.127 (0.073)
1.89 (0.45)
1.96 (0.47)
2.69 (0.64)
2.88 (0.69)
0.00 (0.00)
0.00 (0.00)
3.78 (0.55)
15.32 (2.20)
For detailed heat transfer calculations please refer to our Engineering Assistant software which is available at no cost from your Petro-Canada representative.
Typical Performance Data PROPERTY Colour
TEST RESULTS METHOD ASTM D1500
<0.5
Pour Point, °C (°F)
ASTM D97
-42 (-44)
Flash Point, COC, ° C (°F)
ASTM D92
225 (437)
Fire Point, °C (°F)
ASTM D92
240 (464)
Autoignition Temperature, °C (°F)
ASTM E659
343 (649)
Viscosity,
cSt at 40°C (104°F) ASTM D445 cSt at 100°C (212°F) cSt at 316°C (600°F)
32.1 5.4 0.7
Average Molecular Weight
371
Neutralization Value, TAN, mg KOH/g
< 0.1
ASTM D664
Sulfur by XRF, wt%
ASTM D4294
Conradson Carbon Residue, wt %
ASTM D189
Coefficient of Thermal Expansion, %/°C (%/°F) Distillation
Range, °C (°F) ASTM D2887 10% 50% 90%
< 0.0001 0.01 0.0907 (0.0504) 365 (689) 417 (783) 475 (887)
The values quoted above are typical of normal production. They do not constitute a specification.
*non-toxic defined as non-controlled under WHIMIS, non-hazardous under OSHA and non-dangerous under EUDPD. **Any transport and disposal practice must be in compliance with federal, state, provincial and/or local laws and regulations.
TEMPERATURE F
0
100
CALFLO AF VISCOSITY
3
0.140 800
0.081 50 0.079
0.077
0.135 700
45 0.077
0.075
0.130 600
0.079
0.135 0.130
1
0.073 0.125 0.1
0.125
0.071 100 0
0
0
0
200 100
100
300 200
400 300
100
200
500 400
200
600 700 500 600 700 TEMPERATURE O F TEMPERATURE F
W/m. K 0.145 0.140 0.135 0.130
60 55
0.081 800 0.079
3.0 900 2.8
50
2.6 800
7000.077
45
700 2.2
0.075 600 0.073
40
2.0 600 1.8
0.125
2.4
35 0
0.071 0
100
100
200
200
300
40 0.075 0.073 35 0
100
200
300
400
0
100
200
300
400
0.071
0
100
200
0
100
200
500 600 700 F 500 TEMPERATURE 600 700 TEMPERATURE OF 300 TEMPERATURE C 300 TEMPERATURE O C
CALFLO AF HEAT CAPACITY kg/m3 kJ/kg K
lb/ft3
9000.083
0.083 55
300 300 O TEMPERATURE C TEMPERATURE C
CALFLO AF DENSITY kg/m3 Btu/h.ft F
300 300 TEMPERATURE C C TEMPERATURE
200 200
3
Btu/h.ft OF 60
0.081
10
100 100
CALFLO AF THERMAL CONDUCTIVITY kg/m lb/ft W/m. K 0.145 900
W/m. K cStBtu/h.ft F 0.145 100 0.083 0.140
00
300 TEMPERATURE C
200
300
400
400
500
lb/ft3 Btu/lb O F 60 0.75 0.70 55 0.65 50 0.60 0.55 45 0.50 40 0.45 35 0.40
500
600 700 O F 600TEMPERATURE 700
0 0
100 100
200 200
300 300
400 400
500 500
600 700 600 700 TEMPERATURE TEMPERATURE OFF
TEMPERATURE F 0
0
kg/m3
kJ/kg K
lb/ft3
3.0
60
2.8
55
100
100
200
200
kJ/kg K
Btu/lb F 0.75
3.0
Health and Safety
900
0.70
2.8
0.65
2.6 To obtain Material Safety Data Sheet (MSDS), contact 800 50 0.60 one of2.4Petro-Canada’s TechData Info Lines. 0.55 2.2
45
TechData Info Lines
700
2.0
0.50
40
Lubricants Head Office Petro-Canada 2310 Lakeshore Road West kJ/kg K Btu/lb F Mississauga, 0.75 Ontario 3.0 Canada L5J 0.70 1K2 2.8
Canada 2.6
0.65
- West. . . . . . . . . . . 0.60 - East (English) . . . . 2.4 0.55 (French). . . . . 2.2 0.50 Other Areas. . . . . . . . . . . . . . 2.0 0.45 E-mail. . . . . . . . . . . . . . . . . . 1.8 0.40 Internet. . . . . . . . . . . . . . . . . 0 100 200
0
IM-7852E (06.08)
Trademark of Petro-Canada
TM
100
2.6 2.4 2.2 2.0
0.45
1.8 TechData sheets 0.40 for Petro-Canada’s Cleaning Fluid 35 0 100Technical 200 300 400 regarding 500 600 700 and Flushing Bulletins 0 Fluid 100 and200 300 400 500 600 700 TEMPERATURE F TEMPERATURE F guidelines for system cleaning, flushing and change-out are also available. If you would like to know more about 0 300 100 200 0 300 Petro-Canada’s CALFLO100 TM AF Heat200 Transfer Fluid, or any TEMPERATURE C TEMPERATURE C other product in our complete line of quality lubricants, please contact us at:
600
0 0
300 TEMPERATURE O C 300 TEMPERATURE C
Phone 1-800-661-1199 Phone 1-800-268-5850 Phone 1-800-576-1686 Phone (416) 730-2408
[email protected] lubricants.petro-canada.ca 300 400 500 600
700 TEMPERATURE F
200
300 TEMPERATURE C
1.8
100 100
300 300 TEMPERATURE TEMPERATURE O C C
200 200
Btu/lb F 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0
100
0
200
100
300
400
200
500
Petro-Canada Europe Lubricants The Manor, Haseley Business Centre Warwick, Warwickshire CV35 7LS United Kingdom Phone. . . . . . . . . . . . . . . . . . +44 (0) 2476-247294 Fax. . . . . . . . . . . . . . . . . . . . +44 (0) 2476-247295
600 700 TEMPERATURE F
300 TEMPERATURE C
Petro-Canada America Lubricants 980 North Michigan Avenue Suite 1400, #1431 Chicago, Illinois USA 60611 Phone. . . . . . . . . . . . . . . . . . 1-888-284-4572 Fax. . . . . . . . . . . . . . . . . . . . (708) 246-8994 E-mail. . . . . . . . . . . . . . . . . .
[email protected]