CS-4.waterproof-sealing
RS - 4.concrete topcoat
product data sheet
product data sheet
GENERAL
PERFORMANCE AND FEATURES
A solvent free 2 component high quality impermeable floor-
-
glosslevel
high gloss
coating based on epoxy.
-
colour
in RAL and NCS colours
Very suitable as sustainable and seamless floor finishing of
-
coverage
average 2-4 m2 /liter
parking, garages, workshops, showrooms and warehouses. APPLICATION
ADVANTAGES
The to be treated surface should be dry, clean and free of oil
-
chemical resistant
fats and grease. The object temperature should be between
-
large thickness range possible
10-30˚C and the air humidity < 85%. The product temperature
-
high abrasion resistance
should be between 15-25˚C and minimum 3˚C above dewpoint.
-
easy cleanable
USAGE
PRODUCT CHARACTERISTICS
Can be applied by brush, roller, wiper or tractor.
-
density
mix. approc. 1,55 kg/ltr
The surface should be sufficient pressure secured, minimum
-
solids
100 volume%
25 N/mm2, with a minimum adhesion strength of 1.5 N/mm2.
-
wet film thickness
200 micron ( by roller )
The surface moisture should be < 4%.
-
dry film thickness
200 micron
MIXING RATIO
DRYING TIME ( RH 55% - 20C )
The 2 components has to be mixed on weights.
-
dust dry
4 hours
-
-
passable
after 16 hours
The components should be mixed mechanically, using a step-
part A : part B = 830 grams : 170 grams
-
recoatable
between 16-24 hours
less mixing machine. The guard should be at least 1/3 of the
-
application at 20˚
30 minutes
cross-section of the can.
-
total curing time
maximum 1 day
INSTRUCTIONS
ARTICLE DETAILS
To finish the application by rolling the surface with a large
-
storability minimum 6 months
roller of 50-70cm to achieve the optimum results.
-
storage at temperature between 3-25˚ in the
The appearance of the finishing will be after the application
original packaging
high gloss, which will be reduced by the usage of the flooring
-
VOC-content 0 gr/ltr
till semi gloss.
-
labelling UN-code 1263
CONSULTANCY
SAFETY INFORMATION
-
-
depending on the nature and conditions of the existing surface and its finish, we can advise the matching products and application method.
-
on hazardous substances -
to get further insight in HSSE-legislations and regulations please feel free to contact us.
in agreement with the EU directives 1907/2006 harmful and irratant by inhalation, skin and eye contact
-
in contact with eyes, rinse immediately wit water
powered by Prokol Netherlands